Documenting Obscure Knowledge
it can be that the Barrier Breaker doeshave a bug?Until now i did work with AA.I did flash yours build. This worksbut changing things like wifi encryption enabled does not work.If i apply the resultsare not stored.I was goingback to yours latest AA firmware 3 years ago. Any idea?
You need to reset your wifi config.From AA to BB there are too many changes.
I have done this. complete new installation. No Sysupgrade.Flashback to original TP-Link and new flash of your Barrier Breaker. Luci all in all does not work correct for me. Same with Ethersoft. And i did try also with ExtROOT.If i use original firmware from OpenWRT, than all is good and works.Thats i ask. I have no Linux likein yours discription at home. Just Windows and haveno more enough space for Virtual Box to run a Linux.you announced once to include aria2 and i use it there:https://www.youtube.com/watch?v=LNLMV1SCULcBut does notwork with barrierbreaker
Just for idea Try to have the original software from TP-link,than flash yours build from march and try all the things with luci to do.I guess than you see what i mean.try 29 mhz mode with luci, change to 40. than try to test you have internet just try to update the apps...
Can you be more specific about your method to encounter the issue step by step?
root@openwrt:~# opkg updateDownloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/pa ckages/base/Packages.gz.Updated list of available packages in /var/opkg-lists/barrier_breaker_base.Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/oldpackages/Packages.gz.Updated list of available packages in /var/opkg-lists/barrier_breaker_oldpackages.Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/packages/Packages.gz.Updated list of available packages in /var/opkg-lists/barrier_breaker_packages.Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/routing/Packages.gz.Updated list of available packages in /var/opkg-lists/barrier_breaker_routing.Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/luci/Packages.gz.Updated list of available packages in /var/opkg-lists/barrier_breaker_luci.Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/management/Packages.gz.Updated list of available packages in /var/opkg-lists/barrier_breaker_management.root@openwrt:~# opkg install aria2Installing aria2 (1.18.7-1) to root...Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/packages/aria2_1.18.7-1_ar71xx.ipk.Installing libstdcpp (4.8-linaro-1) to root...Downloading http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/base/libstdcpp_4.8-linaro-1_ar71xx.ipk.Configuring libstdcpp.Configuring aria2.root@openwrt:~#So what is the problem?
Good information servicenow online course
the blog is about vote on the default quality of Servicenow and so much useful for students and employee for more updates go with ServiceNow Online TrainingFor more Info on other technologies go with below linkstableau online training hyderabad mulesoft Online TrainingPython Online Training
Very nice and well done thanks for the useful information ServiceNow Training in Hyderabad
Post a Comment